PRODUCT
INTRODUCTION:
This product named photoelectric detector , detects the smoke by a
couple of infrared diodes. The principle of detecting is granule in the smoke
can reflect infrared light. Infrared diodes are placed in the special chamber. The chamber can shield external
light, but don’t affect the smoke into it . While have no smoke, the diode can
receive very weak infrared light. When the smoke entering the detector, the
diode can receive strong infrared light.
Product
Feature:
MCU automatic processing technology
Manual test
Auto reset
Automatic detection
Mute function
Infrared photoelectric sensor
Sound-light alarm
Strong adaptability for circumstance
SMT design, high stability
Dust-proof, Insect-proof, Auti-visible
light
Technical
Specification:
Operating Voltage: DC9V or AC110-220V
Alarm Current ≤10 Ma;≤40 mA (wireless
type)
Battery Life: About 1 year
Indicate Alarm:Red LED flash
SPL:>= 85Db/m
Operating :-10℃----+50 ℃
Working humidity :≤95% RH
Alarm type :Flash&Sound alarm RF signal (wireless type)
Size:142Φ*41H mm
Installing:Wall-mounted
Detecting area:40 aquare meters when
installation height between 6-12 meters. 20 square meters when installation
height within 6 meters.
Notice :
1、 The detector can’t be installed under worse environment .E.g.
coldest , hottest, dusty.
2、 Please test it monthly to ensure the detector in a normal working
condition.
3、 Please clean the detector by soft brush per six months to ensure the
sensitivity and life of product. Pay attention to switch off power before
clean.
4、 Cut off the power if no use for a long time.
5、 When the viltage of battery is less than 6.7V, the detector will
beep once per 30s . Please change the battery at this condition.(DC9V)
6、 For various reasons, including , but not limited to changes in environmental
conditions, electric disruptions and tampering, the product may not perform as
expected. The user is advised to take all necessary precautions for his/her
safety and the protection of his/her property.
没有评论:
发表评论