PRODUCT
INTRODUCTION:
This product named photoelectric detector , (hereinafter called
detector)detects the smoke by a couple of infrared diodes. The principle of
detecting is granule in the smoke can reflect infrared light. Infrared diodes
are placed in the special chamber. The chamber can shield external light, but
don’t affect the smoke into it . While have no smoke, the diode can receive
very weak infrared light. When the smoke entering the detector, the diode can
receive strong infrared light.
Product
Feature:
MCU automatic processing technology
Manual test
Auto reset
Automatic detection
Mute function
Infrared photoelectric sensor
Sound-light alarm
Strong adaptability for circumstance
SMT design, high stability
Dust-proof, Insect-proof, Auti-visible
light
Technical
Specification:
Operating Voltage: DC9V
Alarm Current ≤10 mA;≤40 mA (wireless
type)
Battery Life: About 1 year
Indicate Alarm:Red LED flash
SPL:>= 85Db/m
Operating :-10℃----+50 ℃
Working humidity :≤95% RH
Alarm type :Flash&Sound alarm RF signal
(wireless type)
Installing:Wall-mounted
Detecting area:40 aquare meters when
installation height between 6-12 meters. 20 square meters when installation
height within 6 meters.
Notice
:
1.The detector can’t be installed under
worse environment .E.g. coldest , hottest, dusty.
2.Please test it monthly to ensure the
detector in a normal working condition.
3.Please clean the detector by soft brush
per six months to ensure the sensitivity and life of product. Pay attention to
switch off power before clean.
4.Cut off the power if no use for a long
time.
5.When the viltage of battery is less than
6.7V, the detector will beep once per 30s . Please change the battery at this
condition.(DC9V)
6.For various reasons, including , but not
limited to changes in environmental conditions, electric disruptions and
tampering, the product may not perform as expected. The user is advised to take
all necessary precautions for his/her safety and the protection of his/her
property.
没有评论:
发表评论